# Installing and Configuring Drivers

This vignette outlines how to install common ODBC drivers and configure them with a driver manager.

## Installation

For Unix and MacOS, ODBC drivers should be compiled against unixODBC. Drivers compiled against iODBC may also work, but are not fully supported.

After installation of the driver manager and driver, you will have to register the driver in a odbcinst.ini file for it to appear in `odbc::odbcListDrivers()`.

### Windows

Windows is bundled with ODBC libraries. However, drivers for each database need to be installed separately. Windows ODBC drivers typically include an installer that needs to be run and will install the driver to the proper locations.

### MacOS

homebrew can be used to easily install database drivers on MacOS.

The UnixODBC driver manager is required for all databases:

    ## Install the unixODBC library
    brew install unixodbc

Most common database drivers can be installed with homebrew. Some drivers are only available from the database vendor.

    ## Microsoft SQL Server ODBC drivers
    brew tap microsoft/mssql-release https://github.com/Microsoft/homebrew-mssql-release
    brew update
    brew install msodbcsql17 mssql-tools

    ## SQL Server ODBC drivers (Free TDS)
    brew install freetds

    ## PostgreSQL ODBC drivers
    brew install psqlodbc

    ## MySQL ODBC drivers (and database)
    brew install mysql
    brew install mariadb-connector-odbc

    ## SQLite ODBC drivers
    brew install sqliteodbc

Some driver installations will not automatically configure the driver with the driver manager. See the “Connecting to a Database” section below to learn more about configuring drivers and data sources.

### Linux - Debian / Ubuntu

apt-get can be used to easily install database drivers on Linux distributions which support it, such as Debian and Ubuntu.

The UnixODBC driver manager is required for all databases:

    ## Install the unixODBC library
    apt-get install unixodbc unixodbc-dev

For SQL Server on Linux it is recommended you use the Microsoft Drivers. The code below will install some common drivers:

    ## SQL Server ODBC Drivers (Free TDS)
    apt-get install tdsodbc

    ## PostgreSQL ODBC ODBC Driversz
    apt-get install odbc-postgresql

    ## MySQL ODBC Drivers
    apt-get install libmyodbc

    ## SQLite ODBC Drivers
    apt-get install libsqliteodbc

## Driver configuration

On Windows, driver config is managed by the operating system, and you don’t generally need to edit any configuration files directly. On MacOS and Linux, however, the driver config is managed by unixODBC, and depending on how the driver is installed, it may or may not be automatically configured.

You can see which drivers are configured by running `odbcListDrivers()`. If the driver you want is not installed, you will need to edit `odbcinst.ini`. You can use `odbcinst -j` (provided by unixODBC) to find out where this file lives.

The basic form of this file is something like this:

    [PostgreSQL Driver]
    Driver          = /usr/local/lib/psqlodbcw.so

    [SQLite Driver]
    Driver          = /usr/local/lib/libsqlite3odbc.dylib

i.e., a mapping between driver names, and the location of the driver file. The driver name is what you pass to `odbc::odbc()` when you connect, e,g:

    library(DBI)
    con1 <- dbConnect(odbc::odbc(), driver = "PostgreSQL Driver")
    con2 <- dbConnect(odbc::odbc(), driver = "SQLite Driver")

If installing the driver did not automatically update this file, you’ll need to update it yourself. You’ll need to figure out where the driver library was installed, using something like `brew list {drivername}` or `dpkg-query -L {drivername}`.

## Data source configuration

It’s also possible to configure named data sources, so instead of typing this:

    library(DBI)
    con <- dbConnect(
      odbc::odbc(),
      driver = "PostgreSQL Driver",
      database = "test_db",
      username = "postgres",
      password = Sys.getenv("PASSWORD"),
      host = "localhost",
      port = 5432
    )

You can type:

    con <- dbConnect(odbc::odbc(), dsn = "test_db")

On Windows, you can set up a data source by using the ODBC Data Source Administrator application is used to manage ODBC data sources on Windows. On Linux and Mac, you’ll need to edit `odbc.ini` (again finding the location with `odbcinst -j`). Each data source is defined in a separate section (defined by `[name]`]), with each paramter going on its own line, e.g.:

    [test_db]
    driver     = PostgreSQL Driver
    database   = test_db
    username   = postgres
    password   = password
    host       = localhost
    port       = 5432

The `driver` entry represents the name of the driver defined in `odbcinst.ini`. You can see all currently defined data sources by running `odbcListDataSources()`.

## Debugging driver and data source configurations

The odbc package may have trouble locating your driver and data source configurations. If you find that `odbcListDrivers()` and `odbcListDataSources()` report no configurations, check the output of `odbcListConfig()` next. While `odbcListDrivers()` and `odbcListConfig()` interface with the unixodbc driver manager through nanodbc—the tool that the odbc package uses to interface with the ODBC API—`odbcListConfig()` interfaces with unixODBC directly. `odbcListConfig()` will show where unixODBC is looking for your configurations.

- If the files listed in `odbcListConfig()` are at a location other than where you’ve configured drivers and data sources, either 1) configure the listed files as instructed above, or 2) change the folder where ODBC should look for configurations using the `ODBCSYSINI` environmental variable. See the following section on setting `ODBCSYSINI`.

- If the files listed in `odbcListConfig()` are where you expected them to be and appear complete, the odbc package may have had trouble interfacing with the unixODBC driver manager through nanodbc. To remedy this, first run `dirname(odbcListConfig()[1])` and note its output. Then, follow the instructions in the section below, replacing `"some/folder"` with the noted output. If this doesn’t resolve the issue, try to build the odbc package from source, e.g. with `devtools::install_github("r-dbi/odbc")`.

### Setting `ODBCSYSINI`

The `ODBCSYSINI` environmental variable controls the path where unixODBC and the odbc package will look for configuration files. Setting `Sys.setenv(ODBCSYSINI = "some/folder")` means that your configuration files should be located at `"/my/folder/odbc.ini"` and `"/my/folder/odbcinst.ini"`. Be sure to set `ODBCSYSINI` before loading the odbc package. That is:

- Restart R
- Run `Sys.setenv(ODBCSYSINI = "some/folder")`
- Load the odbc package with `library(odbc)`
- Test `odbcListDrivers()` and `odbcListDataSources()` again

If setting `ODBCSYSINI` resolves the issue you’ve noted, you may want to set that environmental variable every time you start R. To do so, add an entry like `ODBCSYSINI = some/folder` to your `~/.Renviron` file, which contains environmental variables that are set every time an R session is started. To open that file using R, run `usethis::edit_r_environ()`.

Once you’ve edited `~/.Renviron`, you’ll need to save the file and restart R for changes to take effect.