# An introduction to mgcViz: visual tools for GAMs

#### Matteo Fasiolo and Raphael Nedellec

#### 2025-07-03

# 1 mgcViz basics

The `mgcViz` R package (Fasiolo et al, 2018) offers visual tools for Generalized Additive Models (GAMs). The visualizations provided by `mgcViz` differs from those implemented in `mgcv`, in that most of the plots are based on `ggplot2`’s powerful layering system. This has been implemented by wrapping several `ggplot2` layers and integrating them with computations specific to GAM models. Further, `mgcViz` uses binning and/or sub-sampling to produce plots that can scale to large datasets (\(n \approx 10^7\)), and offers a variety of new methods for visual model checking/selection.

This document introduces the following categories of visualizations:

1. smooth and parametric effect plots: layered plots based on `ggplot2` and interactive 3d visualizations based on the `rgl` library;

2. model checks: interactive QQ-plots, traditional residuals plots and layered residuals checks along one or two covariates;

3. special plots: differences-between-smooths plots in 1 or 2D and plotting slices of multidimensional smooth effects.

## 1.1 Layered smooth effect plots

Here we describe effect-specific plotting methods and then we move to the `plot.gamViz` function, which wraps several effect plots together.

### 1.1.1 Effect-specific plots

Let’s start with a simple example with two smooth effects:

    library(mgcViz)
    n  <- 1e3
    dat <- data.frame("x1" = rnorm(n), "x2" = rnorm(n), "x3" = rnorm(n))
    dat$y <- with(dat, sin(x1) + 0.5*x2^2 + 0.2*x3 + pmax(x2, 0.2) * rnorm(n))
    b <- gam(y ~ s(x1) + s(x2) + x3, data = dat, method = "REML")

Now we convert the fitted object to the `gamViz` class. Doing this allows us to use the tools offered by `mgcViz` and to save quite a lot of time when producing multiple plots using the same fitted GAM model.

    b <- getViz(b)

We extract the first smooth component using the `sm` function and we plot it. The resulting `o` object contains, among other things, a `ggplot` object. This allows us to add several visual layers.

    o <- plot( sm(b, 1) )
    o + l_fitLine(colour = "red") + l_rug(mapping = aes(x=x, y=y), alpha = 0.8) +
        l_ciLine(mul = 5, colour = "blue", linetype = 2) +
        l_points(shape = 19, size = 1, alpha = 0.1) + theme_classic()

    ## Warning: Using `size` aesthetic for lines was deprecated in ggplot2 3.4.0.
    ## ℹ Please use `linewidth` instead.
    ## ℹ The deprecated feature was likely used in the mgcViz package.
    ##   Please report the issue at <https://github.com/mfasiolo/mgcViz/issues>.
    ## This warning is displayed once every 8 hours.
    ## Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
    ## generated.

We added the fitted smooth effect, rugs on the x and y axes, confidence lines at 5 standard deviations, partial residual points and we changed the plotting theme to `ggplot2::theme_classic`. Functions such as `l_fitLine` or `l_rug` are effect-specific layers. To see all the layers available for each effect plot we do:

    listLayers(o)

    ## [1] "l_ciLine"  "l_ciPoly"  "l_dens2D"  "l_fitDens" "l_fitLine" "l_points"
    ## [7] "l_rug"     "l_simLine"

Similar methods exist for 2D smooth effect plots, for instance if we fit:

    b <- gam(y ~ s(x1, x2) + x3, data = dat, method = "REML")
    b <- getViz(b)

we can do

    plot(sm(b, 1)) + l_fitRaster() + l_fitContour() + l_points()

We can extract the parametric effect `x3` using the `pterm` function (which is the parametric equivalent of `sm`). We can then plot the two effects on a grid using the `gridPrint` function:

    gridPrint(plot(sm(b, 1)) + l_fitRaster() + l_fitContour() + labs(title = NULL) + guides(fill=FALSE),
              plot(pterm(b, 1)) + l_ciPoly() + l_fitLine(), ncol = 2)

If needed, we can convert a `gamViz` object back to its original form by doing:

    b <- getGam(b)
    class(b)

    ## [1] "gam" "glm" "lm"

The only reason to do so might be to save some memory (`gamViz` objects store some extra objects).

### 1.1.2 The `plot.gamViz` method

The `plot.gamViz` is the `mgcViz`’s equivalent of `mgcv::plot.gam`. This function wraps together the plotting methods related to each specific smooth or parametric effect, which can save time when doing GAM modelling. Consider this model:

    dat <- gamSim(1,n=1e3,dist="normal",scale=2)
    dat$fac <- as.factor( sample(letters[1:6], nrow(dat), replace = TRUE) )
    b <- gam(y~s(x0)+s(x1, x2)+s(x3)+fac, data=dat)

To plot all the effects we do:

    b <- getViz(b)
    print(plot(b, allTerms = T), pages = 1) # Calls print.plotGam()

Here `plot` calls `plot.gamViz`, and setting `allTerms = TRUE` makes so that also the parametric terms are plotted. We are calling `print` (which uses the `print.plotGam` method) explicitly, because we want to put all plots on one page. Alternatively we could have simply done:

    plot(b)

which plots only the smooth effects, diplaying one on each page.

Notice that `plot.gamViz` returns an object of class `plotGam`, which is initially empty. The layers in the previous plots (e.g. the rug and the confidence interval lines) have been added by `print.plotGam`, which adds some default layers to empty `plotGam` objects. This can be avoided by setting `addLay = FALSE` in the call to `print.plotGam`. A `plotGam` object in considered not empty if we added objects of class `gamLayer` to it, for instance:

    pl <- plot(b, allTerms = T) + l_points() + l_fitLine(linetype = 3) + l_fitContour() +
          l_ciLine(colour = 2) + l_ciBar() + l_fitPoints(size = 1, col = 2) + theme_get() + labs(title = NULL)
    pl$empty # FALSE: because we added gamLayers

    ## [1] FALSE

    print(pl, pages = 1)

Here all the functions starting with `l_` return `gamLayer` objects. Notice that some layers are not relevant to all smooths. For instance, `l_fitContour` is added only to the second smooth. The `+.plotGam` method automatically adds each layer only to compatible effect plots.

We can plot individuals effects by using the `select` arguments. For instance:

    plot(b, select = 1)

where only the default layers are added. Obviously we can have our custom layers instead:

    plot(b, select = 1) + l_dens(type = "cond") + l_fitLine() + l_ciLine()

where the `l_dens` layer represents the conditional density of the partial residuals. Parametric effects always come after smooth or random effects, hence to plot the factor effect we do:

    plot(b, allTerms = TRUE, select = 4) + geom_hline(yintercept = 0)

### 1.1.3 Interactive `rgl` smooth effect plots

`mgcViz` provides tools for generating interactive plots of multidimensional smooths via the `rgl` R package. Here is an example where we are plotting a 2D slice of a 3D smooth effect, with confidence surfaces:

    library(mgcViz)
    library(rgl)
    n <- 500
    x <- rnorm(n); y <- rnorm(n); z <- rnorm(n)
    ob <- (x-z)^2 + (y-z)^2 + rnorm(n)
    b <- gam(ob ~ s(x, y, z))
    b <- getViz(b)

    plotRGL(sm(b, 1), fix = c("z" = 0), residuals = TRUE)

The `fix` argument is used to determine where the 3D effect should be sliced along the z-axis. The plot also shows a subset of residuals (colour-coded depending on sign) that fall close (in term of Euclidean distance) to the selected slice. Notice that `plotRGL` is not layered at the moment, and most options need to be specified in the initial function call. However, the interactive plot can still be manipulated once the `rgl` window is open. For instance here we change the aspect ratio:

    aspect3d(1, 2, 1)

We then close the window using `rgl.close()`.

## 1.2 Model checking

### 1.2.1 New version of traditional model checks

Most of the model checks provided by `mgcv` are contained in `qq.gam` and `gam.check`. `mgcViz` substitutes them with the more advanced `qq.gamViz` and `check.gamViz` methods.

#### 1.2.1.1 The `qq.gamViz` method

Consider the following model with binomial responses:

    set.seed(0)
    n.samp <- 400
    dat <- gamSim(1,n = n.samp, dist = "binary", scale = .33)
    p <- binomial()$linkinv(dat$f) ## binomial p
    n <- sample(c(1, 3), n.samp, replace = TRUE) ## binomial n
    dat$y <- rbinom(n, n, p)
    dat$n <- n
    lr.fit <- gam(y/n ~ s(x0) + s(x1) + s(x2) + s(x3),
                  family = binomial, data = dat,
                  weights = n, method = "REML")
    lr.fit <- getViz(lr.fit)

We can get a QQ-plot of the residuals as follows:

    qq(lr.fit, method = "simul1", a.qqpoi = list("shape" = 1), a.ablin = list("linetype" = 2))

Here `method` determines the method used to compute the QQ-plot, while the arguments starting with `a.` are lists that will be passed directly to the corresponding `ggplot2` layer (`geom_point` and `geom_abline` here). We can remove the confidence intervals and show all simulated (model-based) QQ-curves as follows:

    qq(lr.fit, rep = 20, showReps = T, CI = "none", a.qqpoi = list("shape" = 19), a.replin = list("alpha" = 0.2))

Importantly, `mgcViz::qq.gam` can handle large datasets by discretizing the QQ-plot before plotting. For instance, let’s increase `n.samp` in the previous example:

    set.seed(0)
    n.samp <- 20000
    dat <- gamSim(1,n=n.samp,dist="binary",scale=.33)
    p <- binomial()$linkinv(dat$f) ## binomial p
    n <- sample(c(1,3),n.samp,replace=TRUE) ## binomial n
    dat$y <- rbinom(n,n,p)
    dat$n <- n
    lr.fit <- bam(y/n ~ s(x0) + s(x1) + s(x2) + s(x3)
                  , family = binomial, data = dat,
                  weights = n, method = "fREML", discrete = TRUE)
    lr.fit <- getViz(lr.fit)

Here the `discrete` argument determines whether the QQ-plot is discretized or not. Notice that we can compute the QQ-plot, store it in `o` and then plot it (via `print.qqGam`).

    o <- qq(lr.fit, rep = 10, method = "simul1", CI = "normal", showReps = TRUE,
            a.replin = list(alpha = 0.1), discrete = TRUE)
    o

The coarseness of the discretization grid is determined by the `ngr` argument:

    o <- qq(lr.fit, rep = 10, method = "simul1", CI = "normal", showReps = TRUE,
            ngr = 1e2, a.replin = list(alpha = 0.1), a.qqpoi = list(shape = 19))
    o

We can zoom into particular areas of the plot using the `zoom` generic. Also, given that `qq.gamViz` and `zoom.qqGam` output objects of class `plotSmooth`, we can arrange them using the `gridPrint`:

    gridPrint(o, zoom(o, xlim = c(2, 2.5), ylim = c(2, 2.5)), ncol = 2)

The QQ-plot can also be manipulated interactively using the `shine` generic, which transforms it into a shiny app:

    # Cannot run this when building the pdf for this vignette, but do try it!
    shine(o)

#### 1.2.1.2 The `check.gamViz` method

The `check.gamViz` method is similar to `mgcv::gam.check`, with the difference that it produces a sequence of `ggplot` objects and that it sub-samples the residuals to avoid over-plotting (or stalling entirely) when dealing with large data sets. Here is an example:

    set.seed(0)
    dat <- gamSim(1, n = 200)

    ## Gu & Wahba 4 term additive model

    b <- gam(y ~ s(x0) + s(x1) + s(x2) + s(x3), data = dat)
    b <- getViz(b)

    check(b,
          a.qq = list(method = "tnorm",
                      a.cipoly = list(fill = "light blue")),
          a.respoi = list(size = 0.5),
          a.hist = list(bins = 10))

    ##
    ## Method: GCV   Optimizer: magic
    ## Smoothing parameter selection converged after 8 iterations.
    ## The RMS GCV score gradient at convergence was 1.072609e-05 .
    ## The Hessian was positive definite.
    ## Model rank =  37 / 37
    ##
    ## Basis dimension (k) checking results. Low p-value (k-index<1) may
    ## indicate that k is too low, especially if edf is close to k'.
    ##
    ##         k'  edf k-index p-value
    ## s(x0) 9.00 2.32    1.00    0.53
    ## s(x1) 9.00 2.31    0.97    0.30
    ## s(x2) 9.00 7.65    0.96    0.27
    ## s(x3) 9.00 1.23    1.04    0.67

    ## Ignoring unknown labels:
    ## • xlab : "Residuals"

The `a.qq` argument is a list that gets passed directly to `qq.gamViz`. Similarly, `a.repoi` is passed to `ggplot2::geom_points` and `a.hist` to `ggplot2::geom_hist`.

### 1.2.2 New layered model checks

The `qq.gamViz` and `check.gamViz` functions are not layered, and in fact require using lists of arguments to be passed to the underlying `ggplot2` layers. Instead the methods described in this section are fully layered, hence easy to extend and customize.

#### 1.2.2.1 One dimensional checks using `check1D`

This function allows to verify how the residuals vary along one covariate. Consider the following model:

    set.seed(4124)
    n <- 5e3
    x <- rnorm(n); y <- rnorm(n);
    z <- as.factor( sample(letters[1:6], n, replace = TRUE) )

    ob <- (x)^2 + (y)^2 + (0.2*abs(x) + 1)  * rnorm(n)
    b <- gam(ob ~ s(x) + s(y) + z)
    b <- getViz(b)

Here the responses variance varies a lot along \(x\). Assume that we didn’t know this, but that we wanted to find out whether the residuals are heteroscedastic. We can start by doing the following:

    ck1 <- check1D(b, "x")
    ck2 <- check1D(b, "z")
    gridPrint(ck1, ck2, ncol = 2)

This produces two views along \(x\) and \(z\), but as you can see the plots are initially empty. We might want to add a layer showing the conditional distribution of the residuals along \(x\) and \(z\) and another containing a rug:

    gridPrint(ck1 + l_dens(type = "cond", alpha = 0.8) + l_rug(alpha = 0.2),
              ck2 + l_points() + l_rug(alpha = 0.2), layout_matrix = matrix(c(1, 1, 1, 2, 2), 1, 5))

The left plot suggests that the variance of the residuals might be lower in the middle (\(x=0\)), but it is not entirely clear. The `l_densCheck` layer gives a more clear answer in this case:

    ck1 + l_densCheck()

    ## It is safer to use l_densCheck when residual type is set to "tnormal" or "tunif" in check1D.
    ##  Otherwise it is possible to supply a customized residuals function dFun(). See ?l_densCheck

This layers adds an heatmap proportional to \(\{p(r|x)^{1/2} - p_m(r|x)^{1/2}\}^{1/3}\), where \(r\) are the residuals, while \(p\) and \(p_m\) are their empirical and theoretical (model based) densities. In particular, \(p\) is estimated using the the fast k.d.e. method of Wand (1994) (implemented by the `kernSmooth` package) and \(p_m\) is a standard normal density here. This plot makes clear that the residuals are over-dispersed when \(x\) is far from zero.

The `l_gridCheck1D` provides another way of finding residuals patterns. For instance:

    b <- getViz(b, nsim = 50)
    gridPrint(check1D(b, "x") + l_gridCheck1D(gridFun = sd, showReps = TRUE),
              check1D(b, "z") + l_gridCheck1D(gridFun = sd, showReps = TRUE), ncol = 2)

Here we converted `b` again using `getViz` with `nsim = 50`. This is because `l_gridCheck1D` needs some simulations to compute the confidence intervals. The simulations are done by `getViz` and then stored inside `b`. `l_gridCheck1D` simply bins the residuals according to their \(x\) values, and evaluates a user-defined function (`sd` here) over the observed and simulated residuals.

#### 1.2.2.2 Two dimensional checks using `check2D`

`check2D` is quite similar to `check1D`, but looks at the residuals along two covariates. Here is an example where the mean effect follows the Rosenbrock function:

    set.seed(566)
    n <- 5e3
    X <- data.frame("x1"=rnorm(n, 0.5, 0.5), "x2"=rnorm(n, 1.5, 1),
                    "fac"=as.factor( sample(letters[1:6], n, replace = TRUE) ))
    X$y <- (1-X$x1)^2 + 100*(X$x2 - X$x1^2)^2 + rnorm(n, 0, 2)
    b <- gam(y ~ te(x1, x2, k = 5), data = X)
    b <- getViz(b, nsim = 50)

We start by generating two 2D views:

    ck1 <- check2D(b, x1 = "x1", x2 = "x2")
    ck2 <- check2D(b, x1 = X$fac, x2 = "x2") + labs(x = "fac")

Then we add the `l_gridCheck2D` layer:

    ck1 + l_gridCheck2D(gridFun = mean)

    ck2 + l_gridCheck2D(gridFun = mean)

`l_gridCheck2D` bins the observed and simulated residuals, summarizes them using a scalar-valued function (`mean` here), and adds a heatmap of the observed summary in each cell, normalized using the `nsim` summaries obtained using the simulations. In the first plot above, the pattern in the residual means is not very well visible, due to outliers on the far right. The pattern is made more visible by zooming on the center of the distribution and by changing the size of the bins:

    ck1 + l_gridCheck2D(bw = c(0.05, 0.1)) + xlim(-1, 1) + ylim(0, 3)

As for smooth effect plots, we can list the available layers by doing:

    listLayers( ck1 )

    ## [1] "l_dens2D"       "l_glyphs2D"     "l_gridCheck2D"  "l_points"
    ## [5] "l_rug"          "l_gridQCheck2D"

The most sophisticated layer is probably `l_glyphs2D` which we illustrate here using an heteroscedastic model:

    set.seed(4124)
    n <- 5e3
    dat <- data.frame("x1" = rnorm(n), "x2" = rnorm(n))
    dat$y <- (dat$x1)^2 + (dat$x2)^2 + (1*abs(dat$x1) + 1)  * rnorm(n)
    b <- gam(y ~ s(x1) + s(x2), data = dat)
    b <- getViz(b)

    ck <- check2D(b, x1 = "x1", x2 = "x2", type = "tnormal")

Similarly to `l_gridCheck2D`, `l_glyphs2D` bins the residuals according to two covariates, but the user-defined function used to summarize the residuals in each bin has to return a `data.frame`, rather than a scalar. Here is an example:

    glyFun <- function(.d){
      .r <- .d$z
      .qq <- as.data.frame( density(.r)[c("x", "y")], n = 100 )
      .qq$colour <- rep(ifelse(length(.r)>50, "black", "red"), nrow(.qq))
      return( .qq )
    }

    ck + l_glyphs2D(glyFun = glyFun, ggLay = "geom_path", n = c(8, 8),
                    mapping = aes(x=gx, y=gy, group = gid, colour = I(colour)),
                    height=1.5, width = 1)

Each glyph represend a kernel density of the residuals, with colours indicating whether we have more (black) or less (red) that 50 observations in that bin. It is clear that the residuals are much less variable for \(x \approx 0\) than elsewhere. We can do the same using binned worm-plots:

    glyFun <- function(.d){
      n <- nrow(.d)
      px <- qnorm( (1:n - 0.5)/(n) )
      py <- sort( .d$z )
      clr <- if(n > 50) { "black" } else { "red" }
      clr <- rep(clr, n)
      return( data.frame("x" = px, "y" = py - px, "colour" = clr))
    }

    ck + l_glyphs2D(glyFun = glyFun, ggLay = "geom_point", n = c(10, 10),
                    mapping = aes(x=gx, y=gy, group = gid, colour = I(colour)),
                    height=2, width = 1, size = 0.2)

Notice that worm-plots (Buuren and Fredriks, 2001) are simply rotated QQ-plots. An horizontal plot indicates well specified residual model. An increasing (decreasing) worm indicates over (under) dispersion.

# 2 Special plots

## 2.1 Differences-between-smooths plots

Plotting the difference between two smooth effects can be useful when working with by-factor smooths. For example, here we are fitting a model containing a smooth along `x2` for each value of the `fac` factor variable:

    set.seed(6898)
    dat <- gamSim(1,n=500,dist="normal",scale=20)
    dat$fac <- as.factor( sample(c("A1", "A2", "A3"), nrow(dat), replace = TRUE) )
    bs <- "cr"; k <- 12
    b <- gam(y ~ s(x2,bs=bs,by = fac), data=dat)
    b <- getViz(b)

We can plot the difference between the smooths corresponding to levels `"A1"` and `"A2"`, by extracting the two smooths and then feeding them to the `plotDiff` generic:

    plotDiff(s1 = sm(b, 1), s2 = sm(b, 2)) + l_ciPoly() +
             l_fitLine() + geom_hline(yintercept = 0, linetype = 2)

Notice that the credible intervals for the difference smooth produced by `plotDiff` take into account the cross-covariance between the two smooths.

## 2.2 Plotting multiple slices of multi-dimensional smooth effects

When dealing with smooth effects defined on more than two dimensions, it is often useful to visualize them as a sequence of 2D slices. The `plotSlice` function provides such functionality, by exploiting the faceting tools offerered by `ggplot2`. For instance, here we are slicing a 4D smooth effect along two variables:

    n <- 1e3
    x <- rnorm(n); y <- rnorm(n); z <- rnorm(n); z2 <- rnorm(n)
    ob <- (x-z)^2 + (y-z)^2 + z2^3 + rnorm(n)
    b <- gam(ob ~ s(x, y, z, z2))
    v <- getViz(b)

    # Plot slices across "z" and "x"
    pl <- plotSlice(x = sm(v, 1),
                    fix = list("z" = seq(-2, 2, length.out = 3), "x" = c(-1, 0, 1)))
    pl + l_fitRaster() + l_fitContour() + l_points() + l_rug()

# 3 References

- Buuren, S. v. and Fredriks, M. (2001) Worm plot: a simple diagnostic device for modelling growth reference curves, Statistics in medicine, 20, 1259–1277.

- Fasiolo, M., Nedellec, R., Goude, Y. and Wood, S.N., 2019. Scalable visualization methods for modern generalized additive models. Journal of computational and Graphical Statistics, pp.1-9.

- Murdoch, D. (2001) Rgl: An r interface to opengl, in Proceedings of DSC, p. 2.

- Wand, M. P. (1994) Fast computation of multivariate kernel estimators, Journal of Computational and Graphical Statistics, 3, 433–445

- Wickham, H. (2009) ggplot2: Elegant Graphics for Data Analysis, Springer-Verlag New York.

- Wickham, H. (2010) A layered grammar of graphics, Journal of Computational and Graphical Statistics, 19, 3–28.

- Wood, S.N. (2017) Generalized Additive Models: An Introduction with R (2nd edition). Chapman and Hall/CRC.